Dymond D 60 S HT
Dymond D 60 S HT | |
---|---|
Typ: | Nanoservo |
Spannung: | 3,6 - 7,4 V |
Aufbau | |
Getriebe: | Kunststoff |
Kugellager: | 0 |
Daten 4,8V | |
Stellmoment: | 20 Ncm |
Drehgeschw.: | 0.16 sec/45° |
Abmessungen | |
Gewicht: | 9 g |
Länge: | 24 mm |
Breite | 9.2 mm |
Höhe: | 27 mm |
Hersteller | |
Dymond | |
aktuell im Handel | |
Vertrieb | |
z.B. Staufenbiel | |
RCN Wiki Servo Übersichten | |
Servodatenbank | |
Nano_Servos_Übersicht | |
Dymond_Servos | |
Google-Suche |
Das Servo ist sowohl für 1 als auch 2 LiPo Betrieb geeignet (1S, 2S)
Dymond schreibt zu diesem Servo:
"This micro servo is slightly bigger and more powerful than the popular D 4.7.
It can also handle higher voltage of 2 cell LIPO/LION/LIFE batteries. But watch that the maximum range is not pushed.
That means that programming more than 100% servo throw can reach the limits of a servo and the mechanical stop can cause excessive amp draw which will result in a sudden burnout of the servo amplifier.
Dimensions: 24x9x27 mm,
weight 10 g,
torque 24 oz-in.
Smooth and precise operation. Excellent neutral position recovery"
Dymond gibt also neben all den Vorzügen eine Warnung heraus, dass nicht mehr als 100% Servoweg programmiert werden sollten, da sonst der Anschlag an der Endposition erreicht wird, was zu erhöhtem Stromverbrauch und dann zum Abbrennen der Regelelektronik führt.